Removing Scuffs and Scratches on Your Cars Plastic Bumpers!
Your cars plastic bumpers dont always need replacement when minor damage crop up such as scuffs and scratches. Repairing these scuffs and scratches are not as difficult as you imagined or as complicated as fixing up scratches on sheet metal that are likely to form rust.
Save time, money and effort repairing your damaged bumper with these simple and convenient steps:
Materials Needed:
Automotive Clear Coat
Automotive Paint
Automotive Primer
Dish Soap
Grease and Wax Remover
Paper Towels
Sand Paper
Step 1:Clean the scratched area with dish soap to get rid of any wax or dust particles on the surface. Use a piece of cloth enfolded around a finger to get hold of the scratches and scuffs. Wash the soap entirely and pat dry the surface using paper towels before proceeding to the next step.
Step 2:Check the intensity of the scratches and scuffs. Run your fingernail tip across the scratch and if it can hold the rut, this means that the scratch is deep, otherwise, the scratch is shallow.
Step 3:Polish the scratch with 120-grit sandpaper until it becomes smooth, even and free from tough edges. Bear in mind that plastics are softer than metal so ensure not to sand too much in one spot to avoid having a low part on the surface.
Step 4:Spray about two light coats of automotive primer on the polished spot. Wait for about 30 minutes allowing the coat of primer to dry.
Step 5:Polish the automotive primer evenly with 300-grit sandpaper until it becomes soft to touch. Swab the spot with grease and wax remover to take away oil and dust elements.
Step 6: While holding the spray can about eight inches away from the exterior, spray two to three lean coats of automotive paint straight on the scratch. Let each coat dry for 30 minutes prior to applying the next coat.
Step 7:Using the same procedures as with spraying the paint, apply two coats of automotive clear coat. Let the automotive clear coat dry completely which takes up to 24 hours before attempting to drive the car.
Getting rid of the scuffs and scratches from your cars plastic bumper can be costly especially when the job is done at a professional auto care clinic. However, you can save a lot if you do the repair yourself.
Auto Electrical Repair Keep Current In The New Year!
For many people, the New Year continues to present financial challenges and you may need to hold onto your older car another year. Don’t overlook the responsibilities as a vehicle owner that will keep you safely on the road, including auto electrical repair. Accurate diagnosis is one of the most difficult challenges to be found when working on today’s automobiles. Considering the large number of systems that use electricity in order to operate, being able to quickly diagnose problems with starters and alternators to perform the correct auto electrical repair can be a real asset.
Consider these three resolutions for the New Year:
>Resolution No. 1 — Keep up with fluid and filter changes. Checking on your vehicle’s fluids and filters are important to the longevity of your car and interior comfort. Circle a day on your calendar each month to check all of your fluids and make sure they are at the correct levels. Remember to schedule an oil change, or any other fluid change as recommended by your vehicle’s manual. Don’t hesitate to ask your professional auto mechanic for the appropriate interval for fluid and filter changes.
>Resolution No. 2 — Schedule two vehicle checkups during the year. You will need the help of a professional to perform an auto electrical service to pinpoint any problems that may be happening with your electrical system. A well-trained mechanic can spot potential problems before they happen, especially with alternators. Preventative maintenance is cheap insurance for a reliable vehicle.
>Resolution No. 3 — Take care of small problems early. Unfortunately, cars can’t fix themselves. Putting off minor maintenance or easy repair work can result in larger problems and costly repair bills overall. Don’t procrastinate; repair what’s wrong; have the appropriate services at the correct intervals, and your car will last a lot longer.
Do you have questions about starters and alternators? Contact our ASE Certified Technicians at Price’s Precision auto repair shop today by calling (406) 248-2838, or go on-line to www.pricesprecisionauto.com for more information about auto electrical repair. Our Tech-Net professional auto repair shop in Billings, MT, also serves vehicle owners in the areas of Shepherd and Laurel, MT.
[Top]Different Automotive Services
There are a lot of automotive services available for different types of vehicles. An auto service (Brandon, Fl) is an essential component of car care that car owners should do. Car repair (Brandon, Fl) and car diagnostic services are samples of auto service.
Popular auto services under car repair are AC repair (Brandon, Fl) and collision repair (Brandon, Fl). AC repair is mostly availed by car owners with aging cars. Aging cars are very susceptible to having broken car air conditioning units. An auto AC (Brandon, Fl) works like a refrigerator. It absorbs heat inside the car and expels the heat outside. Auto AC units sometimes differ according to car models so it is better if you consult a mechanic (Brandon, Fl) who is knowledgeable when it comes to auto AC units.
Collision repair (Brandon, Fl) is part of auto body work (Brandon, Fl) and frame work (Brandon, Fl) services. Aside from collision repair, auto body work techniques also cover rust repair, perfecting body parts, sanding car body work repairs, applying primer, and repairing fiber glass. Collision repairs are ideal for cars which got dents due to accidents or road mishaps. Though collision repair together with the other auto body work and frame work services can be done by yourself, it is still highly recommended that you find an auto body shop and let their resident mechanic or mechanics do the job. Car repair services such as these can be very tiring and requires certain skills. There are people who were trained to do such things, so let them do their job. Just make sure that you have hired a reputable auto body shop that produces high quality work before you allow them to touch your car.
Diagnostic services, on the other hand, focuses on checking different car parts to see if they are still in their optimum state, if there is something wrong, and if there are parts that are needed to undergo replacement. Three of the most important parts of the car that should routinely undergo diagnostic are transmission, brakes, and engine.
A car transmission (Brandon, Fl) is also known as a gearbox though some mechanics use the term transmission to refer to the gearbox, clutch, and shafts. It gives the car speed and torque. A car transmission has the ability to reduce the engine speed to slower wheel speed while increasing torque in the process. The car transmission does all these by using gear ratios.
A car engine (Brandon, Fl) is a motor used to convert energy from burning gasoline to mechanical motion. A car engine is a type of internal combustion engine. Internal combustion engines burn fuel and use the produced hot gases for generating power. Most engine configurations are focused on increasing combustion efficiency and engine power.
Lastly, car brakes (Brandon, Fl) are devices for stopping car motion. There are different types of care brakes, but all of them work for the same purpose. Brakes diagnostics is concerned with increased boost of brakes as well as brake repair and replacement.
Have your car regularly checked by professional mechanics and be updated to the latest in the automotive industry in your place.
Scott’s Automotive Inc. 112 Central Dr Brandon, FL 33510 (813) 685-5958 http://scottsautomotiveinc.com/
[Top]Market Your Business With Automotive Promotional Items
Promotional automotive products include much more than key chains and bumper stickers. You can put your message or logo on everything from roadside toolkits to hitch covers. While smaller items make excellent giveaways, use larger products as customer appreciation gifts and raffle items.
Many vendors give out logo key chains at trade shows, job fairs, and in goody bags at other community events. Why not do something a little different and hand out a mini license plate, ice scraper or tire gauge? A tire gauge is a useful promotional item that will remind the recipient of your company every time it’s used. In addition, tire gauges often come attached to a key ring, combined with a pen light or a tread gauge, and as a digital gauge.
Other eye-catching giveaway items include car flags, bumper stickers, static clings and reflective decals. These types of screen imprinted items are especially useful when your company sponsors an event or a sports team. Customers are more inclined to use and display the item when the message supports the event or team. Your logo and contact information are then visible to everyone who sees the vehicle displaying the item. When choosing screen imprinted automotive promotional products, look for vendors who offer 4-color process. You want to make your item stand out with bright colors. These products can also be used as advertising on company vehicles.
The car ribbon magnet supporting various causes continues to be popular with motorists. Use these to show your support and your recipient’s support for everything from breast cancer research to a particular branch of the military. The best ribbons include a heart shape in the loop of the ribbon that provides an additional punch-out magnet to display information.
The ultimate in promotional automotive products is the roadside emergency tool kit. These make great customer appreciation gifts or raffle items. Basic kits include screw drivers, a tire gauge and jumper cables. More expensive kits can also include a flash light, a universal car starter, wrenches, electrical tape and even a first aid kit. Surprisingly, vehicle tool kits are reasonable priced from $20 to $50.
Finally, consider imprinting car organizers with your logo and message. You can put your information on CD organizers, catch-alls, glove box wallets, and mobile office and entertainment centers. Car organizers make nice gifts for both customer and employee appreciation days. Normally, imprinting is priced as one color in one location on the item.
[Top]Many Problems Are Faced By The Auto Industry Due To Online Counterfeiting And The Gray Market.
Counterfeiting is such a menace that even the Federal Bureau of Investigation has termed it the crime of the 21st century. If you dont believe this, perhaps some number crunching can shed some light on the kind of hazards that this activity creates for automotive businesses worldwide. For example, the global automotive parts industry suffers losses pegged as high as $12 billion a year, $3 billion of which is in the U.S. The total global counterfeit market is pegged at a whopping $350 billion. The Motor and Equipment Manufacturers Association (MEMA), realizing the grave situation of counterfeits affecting its businesses, formed the Brand Protection council to take matters of fake counterfeit products in the automobile sector seriously.
What are fake automotive parts? How does one distinguish them from the originals?
Some counterfeits are simply imitations of real automotive parts and look exactly like the original so as to fool the buyer into believing that they are buying the original. Other times, fake or counterfeit automotive parts are simply packaged to look like the original. Counterfeiters often utilize the same brand image, colors and font sizes to ensure that the packaging looks similar to that of the real product. Some of the most common counterfeit automotive parts are things like fan belts, spark plugs, engine mountings, wheel covers, alloy wheels, air filters, fuel filters and oil filters. Sometimes the products carry the logo of the original. Other times counterfeiters simply use outdated parts that have been thrown out by the original company or dealer, renew them with some work and sell them again in the grey market.
There are many problems associated with fake automotive parts.
Such grey market products affect the brand and the reputation of the original manufacturer. Despite being made to look like the original, these products are not the original product. Even though they may be sold at perhaps 1/4th of the original price, the worth is much less than the real product. The safety of your vehicle could be compromised, and it could have many different kinds of problems, from part failure to higher fuel consumption to higher levels of pollution. The most pressing problem with using fakes is that, while you might feel you have gotten a great deal in terms of price, you will never get the intended effect that the original product can offer. In terms of quality and durability, you will always be at a loss if you opt for counterfeit products.
[Top]