Boyce Activated Carbon Products For The Automotive Industry
Our granular activated carbons have a wide range of uses for the automotive industry. Boyce Granular Activated Carbon (GAC) is excellent for low pressure drop, high-efficiency purification of liquids, gases and vapors. Available in several grades, it covers a range of pore size distributions, surface chemistries, particle size distributions and purity levels. Granular activated carbons are used for gasoline vapor recovery, air purification, catalysis, and decolonization/deodorization/contaminant reduction of chemicals.
Automotive Industry Applications
Automotive Evaporative Emissions
Vehicle activated carbon canisters are designed to capture fuel emissions generated by the evaporation of the fuel tank vapors during day to night temperature variations. Emission regulations vary throughout the world. In the United States (US), requirements call for capturing fuel vapors generated during a 72-hour test, while in the European Union requirement are for a 24-hour test. Fuel vapor generation rates are approximately 25 to 30 grams a day for a mid-size vehicle. Our granular activated carbons are used by leading industries for this application because of their superior volumetric cost, performance and proven durability.
Automotive ORVR
On-Board Refueling Vapor Recovery (ORVR) is a U.S. regulation that requires the capture of fuel vapors generated during vehicle refueling events. ORVR presents a unique challenge for the vehicle by requiring the canister to have high fuel vapor capacity at fast loading rates and low pressure drop. ORVR canisters are typically two to three times the size of a standard evaporative emissions canister because of these capacity requirements. Our carbon pellets are the industry standard for this application due to their high capacity, durability and low pressure drop. Further, our special grade of Boyce carbon helps to reduce canister size due to its industry leading capacity.
Automotive PZEV
Partial Zero Emission Vehicle (PZEV) is a California initiated emission category that is expanding across the country. PZEV requires the vehicles fuel system to have no more than 54 mg of emissions during a 72-hour test. PZEV presents a unique challenge to control canister bleed emissions to very low levels, typically less than 10 mg. Boyce special grades gives solution to control canister bleed emissions.
Two-Wheelers
There is a global expansion of canisters on motorcycles to control fuel tank evaporative emissions generated by the evaporation of the fuel tank vapors during the day to night temperature variations. These canisters are typically much smaller than an automotive canister. Our granular activated carbons are chosen for this application throughout the world for their superior volumetric cost and performance and proven durability.
Air Induction Systems
Vehicle regulations in the U.S. sometimes necessitate the control of vapors emitted through the vehicles air induction systems. Unique solutions are required to solve these emissions because of the high airflow within the AIS and the potential to affect engine performance if these airflows are inhibited. Our uniquely designed granular and powder carbon are used to reduce hydrocarbon emissions to targeted levels.
Small Off-Road Engines Fuel tanks for weed trimmers, leaf blowers, lawn mowers, generators and similar products are being mandated to control fuel evaporative emissions. Our granular activated carbons are chosen for this application for their superior volumetric cost and performance and proven durability.
Marine
The U.S. Environmental Protection Agency (EPA) is evaluating evaporative emission control regulations for recreational boats.
Cabin Air (Vehicle Interiors)
Exposure to volatile organic compounds that off-gas from interior components in new vehicles is of increasing concern in many parts of the world. Recent tests have demonstrated significant reductions of VOCs in the cabin by the use of activated carbon sheets. Boyce supplies special grades of activated carbon to make activated carbon sheets. This confirms ACS as a low-cost and effective method for reducing VOC content in the cabin before delivery to the consumer.
Hybrid Electric Vehicles and Plug-in Hybrid Electric Vehicles
Automotive equipment manufacturers are increasingly turning to advanced engine technology to increase fuel economy. HEV and PHEV, while allowing for improved fuel economy, present a unique challenge for the activated carbon canister primarily due to severely restricted purge volumes. While our carbons are recognized for their superior purge performance, to meet the challenges of HEV and PHEV our carbons are typically combined with activated carbon honeycombs to meet emission targets.
Gasoline Direct Injection Engines
Gasoline Direct Injection Engines (GDI), while allowing for improved fuel economy, present a unique challenge for the activated carbon canister primarily due to reduced purge volume. Our carbons are recognized for their superior purge performance to meet most global GDI canister challenges. Additionally, our carbons are combined with our activated carbon to meet PZEV level emission targets.
Fuel Loading/Transfer Facilities
Bulk fuel and chemical transfer facilities use large-scale activated carbon absorbers to capture the vapors that are displaced or generated during the liquid transfer. The characteristics that make Boyce products the premier activated carbon for automotive evaporative emissions control apply to fuel loading as well.
To know more about us please visit www.carbonsuppliers.com contact us on +91 9842091301 Email: [emailprotected]
The Many Advantages Brought About By Contract Manufacturing Companies
Contract manufacturing is a business model that enables companies and third party service providers to take advantage of each others needs and abilities in order to achieve an idea or design. It is a form of outsourcing wherein hiring firms deal with contract manufacturing companies to help them out when it comes to procedures, manpower, tools and product purchasing; this, so they do not have to deal with all of it by themselves. It has been applied in many fields for countless of years, from automotive to aerospace, defense, energy, medicine, and energy. And this comes as no surprise though since contract manufacturing is able to secure companies a lot of advantages.
First on the list is of course, cost savings, which a lot of other outsourcing processes provide. With contract manufacturing, hiring companies do not actually need to invest capital in order to acquire the needed facilities and equipment to get their productivity going. For a minimum fixed rate, they could have another company take on the manufacturing burden and keep it costs controlled according to the set budget. And then the hiring firm, in turn, gets to set aside savings for other priority activities.
This leads us to the second known benefit of contract manufacturing convenience. Since they do not have to worry about the production aspect of the business, hiring companies can focus on other important responsibilities and better their operations as a whole. It is common for small businesses to get overwhelmed with manufacturing to the point that they mismanage their marketing and sales. This is a big disappointment since the latter two should be the one driving the former. But with a contract manufacturer in play, such issues do not have to be a concern.
And then theres flexibility. In these unstable economic times, it is advantageous for businesses to be prepared for change. Having all of the companys facilities rooted in a single location with increasing expenses does not give way to that possibility. When the market crashes, they have to deal with the burden of losses first hand. But with a contract manufacturer, you could just cut contracts and not have to work out the retrenchments and recuperating fixed costs.
Fourth, with contract manufacturing companies, you can gain access to competencies right away, without having to invest time and energy in training personnel. You could just have the contract manufacturer provide you with skilled workers to meet your production demands. And with this comes the fifth benefit of getting contract manufacturing services quality. Obliged to promote your best interest, providers will be more than happy to quality control standards in order to meet their contract responsibilities and your expectations. This should help reflect well on your business and make you more credible in the industry youre serving.
Unknown to some, contract manufacturing companies also stand to gain something out of the partnership with hiring companies, aside from a steady flow of income. Since they can accommodate multiple clients at a time, they do not have to solely depend on the success of one business in order to grow themselves. And on top of that, they also do not have to specialize in just one product or service, making them resilient to market crashes.
[Top]Automotive Locksmiths Dont Panic! If You Lost The Car Keys
Summary:
When the security is the concern, then the locks should be given much importance. Locks are easy and effective way in order to avoid the burglary and theft. It is therefore; important that the locks should be obtained from some reliable and good source so that the house and automobile safety wouldnt be at risk.
Article Body:
It is better to understand first that who are automotive locksmiths and what are their peculiarities. Like other types of locksmiths, automotive locksmiths serve the people by providing them the keys of the locks and repair the defected locks of the car or any automobile. This is the most precious service since by virtue of that, people would find relief when they got tense in the environment of insecurity. People are still unaware about the various capabilities and abilities of automotive locksmiths that besides making the new keys, they can perform a lot of jobs.
Many of the incidences could happen in the life of a man when he would need immediate help. For instance; leaving the keys in the car may raise high concerns for security. A person cant leave his car in order to perform his work, since there could be more chances of stealing. Sometimes, by mistake a person leaves his car without carrying his kids with him. At these instances, the automotive locksmith would come promptly in order to resolve the issue.
People can even call to the dealers and manufacturers of the automobiles when they loss the car keys, however; in this way they have to pay more, even two to three times, as compared to the charges taken by automotive locksmiths. Another benefit of asking the services of automotive locksmiths is that they serve quick service and they remain available 24 hours a day. On the other hand the problem in calling the manufacturers is that they couldnt come as earlier as compared to the automotive locksmiths in order to repair the locks and keys.
The automotive locksmiths are provided with specialized and complex instruments with which it is not difficult for them to open the locked doors within minutes. They can make the car keys again and can install the new locks in the automobiles. These vehicle locksmiths are furnished with specialized maps for their effective and quick movement inside the city and the drivers are also well trained to reach at the destiny without wasting time.
The services of vehicle locksmith are also important and precious for those people who have little kids and who dont know how to open or close the car doors. Sometimes they close the doors and get locked inside with the car keys. At that moment in order to avoid any medical emergency, the opening of the car door is much important. Every person couldnt be expert in opening the car doors without the keys and hence at that moment the vehicle locksmiths could furnish marvelous service by opening the locked doors without the car keys.
If anybody desires to get the valuable services of automotive locksmiths of Las Vegas then he should know the real contact details.
[Top]Brake Repair Dont Let It Break The Bank!
As an experienced driver, you know that your vehicle’s brakes are an essential safety system. With complex hydraulic mechanisms and parts that need replacing on a regular basis, it’s tempting to put off brake service as long as possible to save a few pennies. Failing to keep up with routine brake repair and maintenance will be more costly in the long-run. However, that doesn’t mean you can’t try to reduce the cost of this necessity.
Check out these great ways to save money on your vehicle’s braking system.
Brake Service: Keep Up With Maintenance
Take care of routine brake service issues on schedule. Otherwise, it can cause damage to expensive parts. For example, if you overlook replacing your vehicle’s brake fluid for a long time, you could cause damage to the lines, calipers and the proportioning valve. Replacing all of those parts could be quite expensive, whereas bleeding your braking system would cost very little relatively. Check with your local auto technician for a quote.
Brake Repair: Use Quality Parts
It may be tempting to go for the cheapest parts possible in a brake repair, but mediocre replacement parts fail quicker than their name-brand counterparts. Imported rotors may cost very little, whereas a quality OEM rotor may be double that, but if you have to replace the cheaper rotor three times as often, you’ve lost any money you gained in the first place. Do yourself a favor and pick up OEM or mechanic-recommended equipment. Again, ask for a quote from your brake repair technician.
Change Your Driving Habits!
The most significant thing you can do to save money on brake repair costs is to change how you drive. Slowing down earlier, not coming to abrupt stops and not riding the brakes will go a long way toward making your car’s equipment last longer than it otherwise would.
Need a professional brake repair? Contact our ASE Certified Technicians at Clausen Automotive by calling (608) 221-8321 or go on-line at http://clausenautomotive.com for more information about our brake service. Since 1975, our family-owned auto shop has proudly served vehicle owners in Madison, WI, and the surrounding communities.
[Top]Centennial Colleges Automotive Service Technician Apprenticeship Focuses On Canadian Tire Employm
If there is one brand that is recognizable across Canada, it is Canadian Tire. Founded in 1922, this store is not only known for its loyalty reward program and great prices but also its automotive services. As an automotive technician who wants a clear advantage over the competition, the only program you should consider is the Automotive Service Technician apprenticeship at Centennial College. Thats because this offering, officially known as Automotive Service Technician Canadian Tire MAP 32, is actually partnered with the store. As such, you will be employed or sponsored by Canadian Tire stores and receive all the in-school training necessary for your apprenticeship as an automotive service technician.
Applicants to this automotive service technician training are required to have completed an Ontario Secondary School Diploma (OSSD) or equivalent, or GED (General Educational Development). Additionally, applicants must be employed by a Canadian Tire dealership or be selected through an advising/interview session; and they must also be able to legally work in Canada. It is worth noting that when space permits, additional applicants are selected through an interview process. If the college determines there are additional seats available, applicants will receive a letter and questionnaire with instructions on how to request a program interview. Admission is on a first come first served basis. Lastly, students enrolled in a Centennial College Modified Apprenticeship Program (MAP) are Registered Apprentices, in accordance with the Apprenticeship Branch of the Ministry of Training, Colleges and Universities.
The structure of the automotive service technician apprenticeship sees students experience more in-depth automotive service technician training that includes 32 weeks of in-class training. During this time, students complete five courses, which are part of a provincial automotive curriculum and satisfy the knowledge necessary to become a licensed technician. These courses are: Drive train Systems, Electrical/Electronic & Emission Systems, Engine Systems, Work Practices and Procedures, Suspension/Steering and Brake System. All of these automotive service technician apprenticeship courses are facilitated from Ashtonbee Campus. As Centennial Colleges transportation training hub and the largest facility of its sort in the province, it is fully equipped with product-generic tools and includes a broad range of makes and models from the automotive industry. It is worth noting that automotive service technician training students may be eligible for EI (employment insurance) during the in-class training.
Students of this automotive service technician apprenticeship also obtain four weeks of On-the-job experience at one of Ontarios over 190 Canadian Tire stores, which leads to a high placement rate for candidates. At Canadian Tire locations, automotive service technician apprenticeship students work alongside automotive service professionals, applying what they have learned during their in-school sessions, gaining new knowledge and getting to know the company. It is a chance to show off their newly acquired or developed skills. During the employer sessions, Automotive Service Technician Apprenticeship are compensated.
[Top]